



















Product Overview
VAPOR
CHAMBER-ENHANCED
Vapor
chambers are essentially large, flattened heatpipes with high thermal
conductance. In the ASSASSIN IV VC series, the heat is extracted through
the coldplate, which starts the cooling process in the planar chamber.
The heat gets equalized and sent up the heatpipes to get cooled further
by the fin stacks. This solution raises the cooling capacity to an
astounding 300W of TDP!
THE DIGITAL TOUCH
The
standout addition of the ASSASSIN IV VC VISION is the enhanced
quad-segmented display that monitors the temperature, usage, wattage,
and frequency of your CPU. The digital panel is magnetized, so
installation and adjustments are extremely simple. The display is
controlled via DeepCool software and only requires an open USB 2.0
header.
VISUAL TEMPERATURE
ALERTS
A
temperature warning alert system has been integrated with a color-coded
visual thermometer indicator: under 80 °C, the indicator will stay
green; between 80 °C and 90 °C, it will be a bright orange; when things
get warm above 90 °C, it will go red, and you will start to see flashes.
IN QUIET OR
PERFORMANCE MODE
With a
simple slide of a switch, the ASSASSIN IV VC VISION can morph from a
whisper-quiet cooler when low noise is of the utmost importance to the
efficient cooling force DeepCool air coolers are known for.
ALL CLEAR!
The
ASSASSIN IV VC VISION's case is clean, sleek, and helps channel air
through the fin towers, while the relocatable 120mm fan provides
unobstructed clearance for high-profile RGB RAM.
BE COOL, BE CALM
A key
factor in the ASSASSIN IV VC VISION's extremely silent operation is the
use of three-phase, six-slot, four-pole fan motors with low voltage and
power consumption. The high-end true FDB bearings in each of the fans
are the gold standard, and for good reason. DeepCool is so confident in
our new design that the ASSASSIN IV VC VISION comes with 6 years of
limited warranty coverage!
EXCEPTIONAL BY
DESIGN
Featuring
a vapor chamber-enhanced base and seven heat pipes that deliver
extremely efficient heat transfer through two fin-array heat sink towers
for another level of high heat dissapation. The included DM9 thermal
paste meets the rigorous standards used in industrial applications.
THE FLOW BELOW
Due to the
center 140mm fan sitting deep into the heart of the ASSASSIN IV VC
VISION, there is a lower flow of air that provides additional cooling to
the toasty surrounding VRMs.
STREAMLINED
INSTALLATION
Installing
larger air coolers can be difficult, which is a prime reason the
hardware and installation were designed to be extremely user-friendly
with the 172mm tall ASSASSIN IV VC VISION. Even the magnetic display
panel and main fan sliding design were crafted with ease of installation
in mind.
WIDE RANGE OF
MODERN CPU SOCKET COMPATIBILITY
The
ASSASSIN IV VC VISION supports virtually all modern mainstream CPU
sockets from AMD and Intel, including the LGA1700 and AM5.
£119.99 Inc VAT











